I just finished installing a 4.5 inch lift on 33's on my 00' XJ Classic. Still needs an alignment but just putting around the neighborhood to see how it drove, there was some noise coming from the front end from 1mph to about 10mph then it stops and rides fine. I've checked and tightened EVERYTHING three times and greased up the control arms and anything else that needed it. Any ideas? I installed the 2 inch TC drop kit that came with it so I don't believe it would be the drive shaft but could be wrong. I'm waiting to get a Go Pro to mount and see if I can figure it out but any ideas would be helpful. I've seen similar posts but most seem to have the issue at higher speeds or only when turning. Also, there is no noise when I go in reverse, only in drive. Thanks in advance.