|
|
|
|||||||
| Modified Tech Discussion Forum for Tech related discussion for Modified XJ's and MJ's. |
 |
|
|
Thread Tools | Display Modes |
|
#256
April 6th, 2021, 21:21
|
||||
|
||||
|
Re: XJ radiators, a review.
They uses a black fiber washer similar to a regular flat metal washer less than 1/8 inch thick.
Use something that is non porous and will conform easily,...some silicone will also work. A thin O ring will also work.
__________________
Patrick  #5941996 XJ; 4.0L; AW4; NP231; SYE; D30 and D44; ECTED; 4.10 gears; 30X9.5 -15 BFG/AT/KO; 3" lift; Rusty's LCA; JKS ADJ UCA; Kevins ADJ Track bar; Drawtite Front Receiver; Dual Electric Fans; Dual Battaries. 
|
|
#257
April 7th, 2021, 05:44
|
|||
|
|||
|
Re: XJ radiators, a review.
I used right stuff silicone for that plug. Won't get a better seal than that. When you use it on an oil pan or valve cover you have to have a chisel to get it back off.
|
|
#258
April 7th, 2021, 06:00
|
||||
|
||||
|
Re: XJ radiators, a review.
My plan right now, assuming I get one that fits, is to use an aluminum compression washer with Right Stuff silicon.
Provided the shippers do their job according to the tracking numbers I will get to work on this Saturday.
__________________
Project "Scope Creep": 1996 4wd 4.0L, AX15 The "Varmint-Mobile": 1997 ZJ Laredo, 4wd, 4.0L, Slushbox
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| what do you do with your old radiators? | austinaubinoe | Non-Tech / Off Topic | 14 | September 30th, 2010 05:57 |
| Radiators.....which is best? | sprngfldxj | Modified Tech Discussion | 6 | April 18th, 2008 14:36 |
| Custom Aluminum Radiators - A review | BlueCrusader | Modified Tech Discussion | 5 | May 14th, 2006 17:55 |
| Radiators | Silent | Modified Tech Discussion | 15 | April 1st, 2005 14:49 |
| Radiators | family XJ | Modified Tech Discussion | 3 | August 2nd, 2004 07:45 |
Linear Mode
