azfansinnc
NAXJA Forum User
- Location
- NC
Hi all,
98 XJ. New to me but has had this problem since I got it. The blower is on level 4 (full blast) every time you turn on the key. The only way to stop it is to remove the blower relay or remove fuse 6 (40A) from PDC under the hood.
I initially thought maybe the blower resistor but that didn't fix it. Did I mention that it blows even with the resistor disconnected?
I also took out the A/C heater control panel and took it apart. The blower runs with the panel disconnected as well.
Every once in a awhile the HVAC blower speed switch will work as expected but it only lasts a few cycles.
Any insights on where the blower may be getting its power/ground from? I'm stumped and could use some insights.
Thanks.
98 XJ. New to me but has had this problem since I got it. The blower is on level 4 (full blast) every time you turn on the key. The only way to stop it is to remove the blower relay or remove fuse 6 (40A) from PDC under the hood.
I initially thought maybe the blower resistor but that didn't fix it. Did I mention that it blows even with the resistor disconnected?
I also took out the A/C heater control panel and took it apart. The blower runs with the panel disconnected as well.
Every once in a awhile the HVAC blower speed switch will work as expected but it only lasts a few cycles.
Any insights on where the blower may be getting its power/ground from? I'm stumped and could use some insights.
Thanks.