lawsoncl
NAXJA Forum User
- Location
- North Idaho
If you do, I'm curious as to what the output shaft spline count is. I kind of wonder if it's as easy as cutting it down and bolting on the extension housing to make it 4wd. I never really could get a straight answer from all the internet searches as to what the spline count was. I have long since tossed the old transmission.
Spline count should be the same. 23 splines unless it's from an older Renix which would be 21 splines. As I recall the 4wd shaft is about 7" shorter and the gearcut for the speedo, and rear bearing are in different locations.