NAXJA Forums -::- North American XJ Association  

Go Back   NAXJA Forums -::- North American XJ Association > NAXJA Unibody Jeep Technical Forums > Jeep Cherokee XJ (1984 - 2001) > OEM Tech Discussion
HOME Member FAQ Sponsor Info Rules Bylaws E-Mail

OEM Tech Discussion Forum for OEM (Original Equipment) or stock XJs and MJs.

Reply
 
Thread Tools Display Modes
  #1  
Old December 1st, 2019, 17:38
RrCoX22 RrCoX22 is offline
NAXJA Forum User
 
Join Date: Jun 2018
Location: Ft. Bragg, NC
Posts: 3
Driver Window Grinds When Fully Rolled Up

Driver side electric window will roll down and up fine with no issues but once it's rolled all the way up to the top it will start grinding and act like it want to keep rolling up. Are the teeth on the actual motor shot? What all do I need to replace for the guru's that's had this issue?
Reply With Quote
  #2  
Old December 2nd, 2019, 18:57
lazyxj's Avatar
lazyxj lazyxj is offline
NAXJA Member #1310
 
Join Date: Mar 2004
Location: Los Angeles
Posts: 2,453
Re: Driver Window Grinds When Fully Rolled Up

Quote:
Originally Posted by RrCoX22 View Post
Driver side electric window will roll down and up fine with no issues but once it's rolled all the way up to the top it will start grinding and act like it want to keep rolling up. Are the teeth on the actual motor shot? What all do I need to replace for the guru's that's had this issue?
The only way to know for sure what is going noise to remove the door panel and see what is happening.
To prevent the motor from continuing to run once the window is all the way down or up, there is a circuit breaker, inside the window controller, that opens and shuts off the power once the window reach the end of its run. The rise in amperage, when the rotor is locked, increases greatly and activates the circuit breaker. The circuit breaker may be bad and is allowing the motor to continue running.
The motor's output shaft has a worn gear that may be slipping on the shaft.
Open it up and take a look.
__________________
Both XJs are still Real XJs http://www.naxja.org/forum/showthrea...hlight=real+XJ
01 Sport, Russ Pottenger 4.6, AW4, 4" lift, 33 X 10.50 KM2, 4.56-8.25 TruTrac, D-30-E-Locker with alloy shafts, Hidden M8000 winch, Vanco front and ZJ rear disc brakes, Frame stiffeners, Lots of armor, Towing baseplate. http://www.flickr.com/photos/lwade/c...7603770130683/
1997 Country, Mostly stock, 2" lift, Engine mods, NP242, Towing baseplate
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
WTB: driver window motor poomero NorthWest For Sale/Wanted 1 September 21st, 2016 00:35
driver's window not working cbs_24 OEM Tech Discussion 9 March 17th, 2016 10:56
Driver's window won't go up! Reddleman OEM Tech Discussion 5 February 18th, 2011 09:03
98 Cherokee Classic XJ - Fully Built Rock Crawler/Daily Driver Cruzzin_XJ For Sale: Private Party Only. XJ ITEMS ONLY 3 April 22nd, 2008 10:31
Driver window clicks at the top. DesertXJ68 OEM Tech Discussion 25 January 17th, 2007 10:53


All times are GMT -7. The time now is 14:33.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
NAXJA and NAXJA logo's Copyright NAXJA. All content/images Copyright NAXJA 1999-2014