NP242 Questions

XJI6191 said:

Which is probably why they don't cost much!

Click to expand...

The $65 eBay listing I saw was for the borg warner. And I was under the impression that was a higher quality more expensive chain. So I didn't want to risk getting a fake or something

cmahaff said:

The $65 eBay listing I saw was for the borg warner. And I was under the impression that was a higher quality more expensive chain. So I didn't want to risk getting a fake or something

Click to expand...

Not that you ever see fake knock-offs on eBay, right?

That's about right, there are several (not on *bay).
https://transpartsdirect.com/shop/borg-warner/new-borg-morse-transfer-case-chain-np242-np244-hv028/

I was able to get the transfer case torn down, and all of the components look to be in great shape. I did end up ordering a chain for good measure just in case the old one was stretched a bit.

I decided to redo the u-joints including the centering yoke on the front drive shaft.

I think this could have also been a culprit in the loud banging.

I have a question about that ball in the centering yoke. I ordered a new one and the ball is so stiff and cannot be moved. Is this normal?
The old one moves very easily and I'm wondering if that is part of the issue.

That sounds normal. Binding in the ball or needle bearings would be more of a concern. New ones are pretty tight which helps you pinch your fingers more often during the assembly process.

oOoOO I look forward to that. Ok thanks. Ya it is super tight. I cannot move it at all with my hands

Whoops. Anyone have a np242 case they wanna sell? I really just need the housing