• NAXJA is having its 18th annual March Membership Drive!!!
    Everyone who joins or renews during March will be entered into a drawing!
    More Information - Join/Renew
  • Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.

Condenser thread cutting nut size

xeroOTG

NAXJA Forum User
Location
floater
Hey! I lost one of the thread cutting nuts that attaches the condenser to the radiator. My research shows that its Mopar 6100814 which is out of production, and points to a m6 nut but I'm not sure I believe it. Does anyone happen to know what size it is?
 
That sounds about right, TBH. Could you measure the stud and err a little on the small side perhaps? I don't have one handy or I'd take a measurement myself.
 
I suppose I should update this. I can always depend on Kastein to drop by and comment ;). I chose Dorman Help 45572 which is for a 1/4" stud. It worked but did not cut threads as deeply as the OEM nut did and I imagine it will easily strip. If I take it apart again and get a metric nut, I'll update this.

Sent from my Pixel 2 using Tapatalk
 
Back
Top