custom fabricated transfer case linkage ideas,../

..haveing to use an old NP 228 transfer case with 2HI or 2LO option and was looking for some way or custom fabrication idea to make the second transfer case lever mechanically actuated (I.E a push and pull mechanism)-As always all advice/suggestion/comment welcome and appreciated-Fotos and pics/diagrams, etc would be nice if possible .-TIA

bxj

`,..has anyone not fabricated something similar along these lines-maybe a simple bellcrank setup to enable the second 2LO or 2HI transfer case lever to operate ?-
TIA

,. this custom fabricated transfer case linkage is going to be fitted to the transmission tunnel in some fashion on a 1986 XJ so that it will be separate from the original and main linkage-Anyone tried or done this with any success-TIA

I don't really have much info for you, but Skyjacker does offer a nifty product for eliminating the mount to the body. There was a link to it on a previous thread or you might be able to find it on the Skyjacker web site. Jeff