• Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.

Suspension Parts Source

Beagles

NAXJA Forum User
I've got the front end out of my '89 XJ and wanted to install poly bushings in the upper control arms while everything is apart (LCA's are Rancho units that already have poly bushings). I've searched the internet and made a few phone calls but can't seem to find anyone that will sell me the 4 poly bushings that I need. Current bushings are stock w/250k miles. Any suggestions?

Also, I need the rubber coil spring insulators that fit between the top of the coils and the unibody. NAPA didn't have a parts listing for either these or the bushings.

Any help would be appreciated!

Thanks,
Jim
 
Quadratec

www.quadratec.com

Part number 76158.84X

<EDIT>Oops -- just re-read your question. That part number is for the lower control arm bushings. Not sure if they have 'em for uppers -- call them at 1-800-745-5337 and ask.
 
Last edited:
Back
Top