• NAXJA is having its 18th annual March Membership Drive!!!
    Everyone who joins or renews during March will be entered into a drawing!
    More Information - Join/Renew
  • Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.

Pitman Arm Tie Rod End Boot Tears

I don't see as you have many choices. Either pull a factory arm or try one of the other arms, I would buy both (since they are cheap) and send the one that fits the worst back.
 
Yep had to cut my original arm off. Tried torch and pb for weeks before hitting it with a cutoff

Sent from my SM-G975U using Tapatalk
 
Ok, got a new stock pitman arm, much shorter than what I had, the tierod end fits in the taper much better, it is not bored as deep. With stock length arm, geometry is better, track bar and drag link are now more parallel.

Also put in a new used Durrango gear box and rebuilt pump for steering.

Thanks!
 
Back
Top