• Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.

Tie Rod End Boots

As with the boots on ball joints, I don't know where you would find just the boots. If you did, I would think the joint would have to be removed to get a new one on anyway. So might as well measure/count the rotations and change them out.
 
You can buy universal boots at pretty much any parts store. Its only one nut and a whack with a hammer to put a new boot on the ball joint. No need to replace the whole thing if its good.
 
*tie rod end, not ball joint. I would replace the ball joints if I was in it that deep. I would put a new boot on a tie rod though, put off having to pay for an alignment.
 
You must log in or register to reply here.

Similar threads

SAMSET
Safety Toe Timberland Pro work boots
Replies
0
Views
124
SAMSET
SAMSET
Jeepmedic46
Rough country tie rod
Replies
2
Views
1K
maxbraketorque
M
R
I F***ed myself........
Replies
4
Views
2K
RCP Phx
R
T
1 Ton steering clearance issues
Replies
9
Views
849
XJChang
X
Bent
AAT Workday, Sat. 2/23/24.
Replies
7
Views
210
Bent
Bent
Back
Top