1626 is for an 87 to 90, right?
Do this and don't look back:
Tired of having a poor selection of oil filters for your Renix Jeep? Limited availabilty a pain for you? 20mm threads? We don’t need mumblemeter threads on our oil filters.
Here’s a simple mod that allows you to use the very popular SAE threaded oil filters which are more readily available. The old standard 3/4″ SAE thread.
You can purchase a new oil filter nipple from the dealer for under $10 and never be bothered again. Part number 53007563AB. It’s the one on the left. 53007563AB 7-8 15-16
Or, grab one off a 91 and later XJ at the junkyard. Be forewarned though. You need a 7/8 wrench to remove a Renix nipple, but a 15/16 wrench for the later style.
And just in case you need to replace your oil filter adapter o-rings, here’s a handy guide.
Oil Filter Adapter O-Ring Sizes
87-90 Renix Model O-rings
0.799 x 0.103 AS568 size -117
1.296 x 0.139 AS568 size -219
2.484 x 0.139 AS568 size –230
Dealer Part Numbers for Renix. Sold individually:
33002970, 33002971, 33002972
Renix kit from Crown Automotive-33002970K
91-01 HO Model Orings
0.676 x 0.070 AS568 size -017
0.859 x 0.139 AS568 size -212
2.484 x 0.139 AS568 size -230
Revised 03-07-2017