Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Welcome to the new NAXJA Forum!
If your password does not work, please use "Forgot your password?" link on the log-in page.
Please feel free to reach out to [email protected] if we can provide any assistance.
2"x4" is a perfect fit inside the rear rails. cut out the sheetmetal between the stock bumper mounts and notch the DS mount to clear the gas filler lines. check out my bumper build, thats what i used and how i did it.
I've done it with 2x3 but since the frame rail cracked I need to beef it up some inside and out. Due to the gas tank raise my filler lines don't run through there anymore. I just didn't pull the rear bumper yet to measure and wanted to order steel this weekend. Thanks!
i used 4x2x1/4" box steel on mine. i had to cut the end off of the shackle bolts and notch the drivers side for the fuel filler lines like posted above. the frame rail is sleeved for those lines so even if your tank is raised it may still pose an issue.