transfer case drop question... - NAXJA Forums -::- North American XJ Association

rngrfrd2000 · #1 March 17th, 2004, 19:40

i am installing my custom drop and i was wondering what you do with the studs that come out of the frame? would someone sell a collar...or do i just drill up through everything? thanks guys

Barger · #2 March 17th, 2004, 19:46

Take them out a replace them with bolts.
If thread 2 nuts on to the stud you can turn the top one against the bottom one and the studs will turn out of the frame. I'd use some PB breaker too.
Good luck

dirtclod · #3 March 17th, 2004, 21:21

I removed the studs with a pair of vise grips. They will come out. Then use bolts in place of the studs.

Kejtar · #4 March 17th, 2004, 23:07

Quote:

Originally Posted by dirtclod

I removed the studs with a pair of vise grips. They will come out. Then use bolts in place of the studs.

Spend couple bucks and get a stud puller: comes in handy and makes life easier. I think it cost me abotu $5 from harbor freight or it's around $10 from Sears.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Transfer Case Drop	deepcdiver	Modified Tech Discussion	10	November 25th, 2006 11:26
transfer case drop kit, coil spacers, shackles	dellstopjeep	Wanted: Private Party Only	0	March 6th, 2004 02:06
CA-Rubicon Express Transfer case drop - NEW	Xjman1	For Sale: Private Party Only. XJ ITEMS ONLY	4	February 10th, 2004 22:02
XJ Transfer case drop kit	1badxj	For Sale: Private Party Only. XJ ITEMS ONLY	1	January 20th, 2004 10:43
i have hack and tap can i get rid of my transfer case drop?	bill hitchcock	Modified Tech Discussion	3	April 11th, 2003 12:49

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)