CAN bus to CCD bus Protocol Translator(Chrysler PCM Simulator)

[Alexia]

Originally Posted by Palani

That sounds great! How are you liking the TDI? I considered that option but there aren't any junkyards here on the Big Island where I live to pull parts from so a crate engine seemed more do-able despite the upfront cost. The Cummins has been great, just working out a couple kinks with fan controllers and ac lines, etc. Normal engine swap speed bumps.

Is your set-up based on the Teensy chip you and Alexia were discussing? I've never played with anything like this before so I'll be recruiting a friend of mine from the industry that deals with programmable hardware regularly. I'm looking forward to seeing your setup. In the meantime, would you mind providing a basic parts list so I can get things on order? Thanks in advance!

For CAN bus to CCD bus:
Teensy 3.2
2x CAN bus transceivers - I used the TJA1050 chip to do write only for the CCD bus.
Power supply - I used a single voltage regulator to power the Teensy.