vzimmer113
NAXJA Forum User
- Location
- Ohio
I read fyrfytr1717's post about the radiator fan override switch found here... http://www.naxja.org/forum/showthread.php?t=1025399
It's a really good post and its very informative about how to hook up an override switch if you want to try to do it. I think I'm going to try to tackle it soon, using his post as a guide.
If you read the post, it tells you that the switch you mount in the cab is switching the ground, as opposed to switching the 12v power. So my question about this is if I plan on using a little LED rocker switch to go along with my fog and driving light switches, how to I wire them so that the LED indicator still comes on when the switch is turned on? The switches have 3 terminals on them, obviously one for a 12v power source, one for the accessory, and one for the ground. Is it as simple as I think by just switching the 12v power source to the ground on the switch and the ground to the 12v source? Or am I wrong...
It's a really good post and its very informative about how to hook up an override switch if you want to try to do it. I think I'm going to try to tackle it soon, using his post as a guide.
If you read the post, it tells you that the switch you mount in the cab is switching the ground, as opposed to switching the 12v power. So my question about this is if I plan on using a little LED rocker switch to go along with my fog and driving light switches, how to I wire them so that the LED indicator still comes on when the switch is turned on? The switches have 3 terminals on them, obviously one for a 12v power source, one for the accessory, and one for the ground. Is it as simple as I think by just switching the 12v power source to the ground on the switch and the ground to the 12v source? Or am I wrong...