NAXJA Forums -::- North American XJ Association  

Go Back   NAXJA Forums -::- North American XJ Association > NAXJA Chapters > Sierra Chapter > Sierra Chapter For Sale
HOME Member FAQ Sponsor Info Rules Bylaws E-Mail

Sierra Chapter For Sale ONLY Local Sale Items here.

Reply
 
Thread Tools Rate Thread Display Modes
  #1  
Old April 2nd, 2021, 12:53
Rob D's Avatar
Rob D Rob D is offline
NAXJA Member
 
Join Date: Sep 2002
Location: Pittsburg CA
Posts: 708
Springs and things

I've got a few things I would like to get out of my garage so I have room to put more junk in there. Here's what I have, that I remember right now.

A set of Full Traction 6" front coils - $40
Stock Ford E350 32-spline FF axle shafts in good shape(if I remember right they are 35" & 37.5" in length) - $30ea
E350 Dana 60 pinion flange - $10
Narrowed, trussed, D44 front housing w/inner shafts. Inner shafts are Yukon TJ D44 shafts w/Spicer joints in good shape - $400
Used Yukon D44 4.88 reverse gears (came out of the axle listed above. If you get the axle and want these gears I'll throw them in with the axle). - $40
New D44 Motive 5.13 reverse gears. - $60

There will be more in the near future to include;
GM small bearing spindles, 5x5.5 hubs and rotors with Timken wheel bearings that I am still using until I do the 8 lug conversion on my front end. I was also using them on the axle listed above.
35 spline D44 w/ARB AB109. Explorer disc brakes, 4.88 Yukon gears and TNT u-bolt eliminator spring pads.
A full width XJ rear D44 truss I may throw in with the rear axle when I sell it.

All items are OBO and I prefer not to ship. PM or email will work best if you're interested.
__________________
Rob D
'91 Cherokee Larado, BDS 5.5" coils w/ACOS's, 6.5" Clayton springs, 37" Patagonia MT's, 4:88's, 35-spline D44 w/ARB and Explorer disc's in back, F250 hp44 front w/E-Locker.
Reply With Quote
  #2  
Old April 3rd, 2021, 00:58
blondejoncherokee's Avatar
blondejoncherokee blondejoncherokee is offline
NAXJA Member
 
Join Date: Oct 2007
Location: sacramento
Posts: 13,407
Re: Springs and things

Might be interested in the axles for a friend.
__________________
As soon as I crest the top i'ma turn driver and floor it!

1998 4.6 stroker , aw4 XJ on 60/14b , 5.38s, grizzly/detroit, cage, 40s, psc big bore box , assist, 3 link,transgo aw4 reprogram
Reply With Quote
  #3  
Old April 3rd, 2021, 12:00
Rob D's Avatar
Rob D Rob D is offline
NAXJA Member
 
Join Date: Sep 2002
Location: Pittsburg CA
Posts: 708
Re: Springs and things

I almost forgot, for the future items, is a set of 5 17x8.5 Raceline 928M wheels with 5x5.5" pattern. These are the street version of their beadlocks. 4 of the 5 has a little rock rash on the "locking" ring. The 5th was the spare the last time I ran a trail. I'll probably be asking about $500 for the wheels, which is about 50% of new price.
I'm shooting for about $800 for the rear axle which will be a quick swap from stock, and run with it. You'll just need an air source for the ARB. It will include 5x4.5 to 5x5.5 adapters.
__________________
Rob D
'91 Cherokee Larado, BDS 5.5" coils w/ACOS's, 6.5" Clayton springs, 37" Patagonia MT's, 4:88's, 35-spline D44 w/ARB and Explorer disc's in back, F250 hp44 front w/E-Locker.
Reply With Quote
  #4  
Old April 4th, 2021, 10:35
need-a-bow's Avatar
need-a-bow need-a-bow is offline
NAXJA Member
 
Join Date: Aug 2014
Location: Illinois
Posts: 1,193
Springs and things

PM sent on new gears.

Sent from my Pixel 3a using Tapatalk
Reply With Quote
  #5  
Old April 4th, 2021, 12:33
EricsXJ's Avatar
EricsXJ EricsXJ is offline
NAXJA Member #616
 
Join Date: Mar 2003
Location: Reno, Nevada
Posts: 2,426
Re: Springs and things

Hi Rob,

I am very interested in the axles. These are what you were running on your white XJ, right? I'll also send you a PM.
__________________
www.ericsxj.com
Reply With Quote
  #6  
Old April 8th, 2021, 20:15
Rob D's Avatar
Rob D Rob D is offline
NAXJA Member
 
Join Date: Sep 2002
Location: Pittsburg CA
Posts: 708
Re: Springs and things

Quote:
Originally Posted by EricsXJ View Post
Hi Rob,

I am very interested in the axles. These are what you were running on your white XJ, right? I'll also send you a PM.
Return PM sent Eric.
__________________
Rob D
'91 Cherokee Larado, BDS 5.5" coils w/ACOS's, 6.5" Clayton springs, 37" Patagonia MT's, 4:88's, 35-spline D44 w/ARB and Explorer disc's in back, F250 hp44 front w/E-Locker.
Reply With Quote
  #7  
Old April 9th, 2021, 14:47
831_xj's Avatar
831_xj 831_xj is offline
NAXJA Member
 
Join Date: Jan 2013
Location: Santa Cruz
Posts: 2,882
Re: Springs and things

I’ll take all the spindle hub stuff
__________________
I know a little bit about nothing..
Daily MJ

yewwy crawler
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
A Few Things. Pretty Big Things Stukboy NAC Classifieds 15 March 23rd, 2012 22:05
Things seen on my run to Pagosa Springs and back..... YELLAHEEP Colorado Chapter 18 April 13th, 2010 17:28
WTB things and selling things Swamprat Red River Chapter For Sale/Wanted 18 January 1st, 2010 22:57


All times are GMT -7. The time now is 16:04.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2021, vBulletin Solutions, Inc.
NAXJA and NAXJA logo's Copyright NAXJA. All content/images Copyright NAXJA 1999-2014