NAXJA Forums -::- North American XJ Association  

Go Back   NAXJA Forums -::- North American XJ Association > NAXJA Other Technical Forums > Tow Rigs and Trailers
HOME Member FAQ Sponsor Info Rules Bylaws E-Mail

Tow Rigs and Trailers Hey, not all of our Jeeps are great on the highway. Post here for tech related to getting your XJ to the trailhead.

Thread Tools Rate Thread Display Modes
Old July 1st, 2003, 12:44
Ted Z's Avatar
Ted Z Ted Z is offline
NAXJA Forum User
Join Date: Jun 2002
Location: Michigan
Posts: 463
I read about a good rust breaker.....

i read in the tech of one of the 4x rags about using a mix of 50% Kerosene and 50% ATF works great on rusty fasteners.....
Reply With Quote
Old July 1st, 2003, 12:50
Rocky's Avatar
Rocky Rocky is offline
NAXJA Forum User
Join Date: Mar 2003
Location: Up north
Posts: 66
My grandfather is a mechanic, has been since WW2, he swears that a 50% diesel & 50% ATF is the best there is. Works great for me, haven't tried it with kerosene, although I think it would be similar.
How's the new XJ coming? Sorry to see the old one all messed!
Reply With Quote
Old July 15th, 2003, 20:31
cherokeekid95's Avatar
cherokeekid95 cherokeekid95 is offline
NAXJA Forum User
Join Date: Jul 2003
Location: york, pa
Posts: 181
i bet they work about the same. kero is very similar to diesel.
Reply With Quote
Old July 15th, 2003, 22:19
ChEwBaCcA ChEwBaCcA is offline
NAXJA Forum User
Join Date: Jun 2002
Location: Chicago
Posts: 576
Kryoil is all you need.....only sold to industry but you can buy it direct on the web .....bout $7 a can but makes PB blaster look like water

Reply With Quote
Old July 16th, 2003, 14:19
Vug's Avatar
Vug Vug is offline
NAXJA Forum User
Join Date: May 2002
Location: West Michigan
Posts: 337
2nd the Kroil

Check out Kano's other products too.
Reply With Quote
Old July 16th, 2003, 17:57
ECKSJAY's Avatar
Water is dirty
Join Date: Jun 2003
Location: Covington, WA
Posts: 13,008
I have a friend who has been using this for about 8 years on his guns and as a parts cleaner. The lanolin in it is optional but if you can get ahold of it it's a lot easier on the hands. This is from Ed Harris, a known gun writer who worked for Ruger and the US Gov. What reminded me of this stuff was the ATF/Kerosene. Enjoy!

Mix Your Own "Ed's Red" Bore Cleaner... It Really Works!

By Ed Harris Rev. 12-27-94

Three years ago I mixed my first "Ed's Red" and I still think the
"recipe" is a great idea. If you have never tried it, or maybe lost the
recipe, I urge you save this and mix your own. My followers on the
FIREARMS Echo think it's the best thing since smokeless powder!
Therefore, I'll summarize the story again for the passing parade that
didn't get it the first time...

I originally did this because I used a lot of rifle bore cleaner and was
deterred by the high price of commercial products. I knew there was no
technical reason why you could not mix an effective bore cleaner using
common hardware store ingredients which would be inexpensive, effective,
and provide reasonable corrosion protection and adequate lubrication.

The "recipe" is based on proven principles and incorporates two polar
and two nonpolar ingredients. It is adapted from a formula in Hatcher's
Notebook, Frankford Arsenal Cleaner No.18, but substituting equivalent
modern materials. I had the help of an organic chemist in doing this and
we knew there would be no "surprises" The original Hatcher recipe called
for equal parts of acetone, turpentine, Pratts Astral Oil and sperm oil,
and optionally 200 grams of lanolin added per liter.

Pratts Astral oil was nothing more than acid free, deodorized kerosene.
We use K-1 kerosene of the type normally sold for indoor space heaters.
An inexpensive, effective substitute for sperm oil is Dexron (II, IIe or
III) automatic transmission fluid. Prior to about 1950 that most ATF's
were sperm oil based, but during WWII a synthetic was developed for use
in precision instruments. With the great demand for automatic
transmission autos after WWII, sperm oil was no longer practical to
produce ATF in the quantity demanded, so the synthetic material became
the basis for the Dexron fluids we know today. The additives in ATFs
which include organometallic antioxidants and surfactants, make it
highly suitable for our intended purpose.

Hatcher's original formula used gum spirits of turpentine, but
turpentine is expensive and highly flammable. Cheaper and safer is
aliphatic mineral spirits, which is a petroleum based "safety solvent"
used for thinning oil based paints and as automotive parts cleaner. It
is commonly sold under the names "odorless mineral spirits," "Stoddard
Solvent" or "Varsol".

There isn't anything in Ed's Red which will chemically remove copper
fouling, but it does a better job on carbon residue than anything out
there. Several users have told me, that with exclusive use of "ER" does
reduce the buildup of copper fouling, because it removes old impacted
fouling which is left by other cleaners, reducing the adhesion of
abraded metal to the surface, and leaving a cleaner surface which
reduces subsequent fouling. It appears that "ER" will actually remove
metal fouling it if you let it "soak" so the surfactants will do the
job, though you may have to be patient.

The lanolin is optional. The cleaner works quite well without it.
Incorporating the lanolin makes the cleaner easier on the hands, and
provides better residual lubrication and corrosion protection if you use
the cleaner as a protectant for long term storage. If you want to
minimize cost, you can leave the lanolin out and save about $8 per
gallon. Mix some yourself. I know it will work as well for you as it
does for me.

CONTENTS: Ed's Red Bore Cleaner

1 part Dexron II, IIe or III ATF, GM Spec. D-20265 or later. 1 part
Kerosene - deodorized, K1 1 part Aliphatic Mineral Spirits, Fed. Spec.
TT-T-2981F, CAS #64741-49-9, or substitute "Stoddard Solvent", CAS
#8052-41-3, or equivalent, (aka "Varsol") 1 part Acetone, CAS #67-64-1.

(Optional up to 1 lb. of Lanolin, Anhydrous, USP per gallon, OK to
substitute Lanolin, Modified, Topical Lubricant, from the drug store)


Mix outdoors, in good ventilation. Use a clean 1 gallon metal,
chemical-resistant, heavy gage PET or PVC plastic container. NFPA
approved plastic gasoline storage containers are also OK. Do NOT use
HDPE, which is breathable because the acetone will evaporate. The
acetone in ER will attack HDPE in about 6 months, making a heck of a

Add the ATF first. Use the empty container to measure the other
components, so that it is thoroughly rinsed. If you incorporate the
lanolin into the mixture, melt this carefully in a double boiler, taking
precautions against fire. Pour the melted lanolin it into a larger
container, rinsing the lanolin container with the bore cleaner mix, and
stirring until it is all dissolved.

I recommend diverting a small quantity, up to 4 ozs. per quart of the
50-50 ATF/kerosene mix for use as an "ER-compatible" gun oil. This can
be done without impairing the effectiveness of the mix.


1. Open the firearm action and ensure the bore is clear. Cleaning is
most effective when done while the barrel is still warm to the touch
from firing. Saturate a cotton patch with bore cleaner, wrap or impale
on jag and push it through the bore from breech to muzzle. The patch
should be a snug fit. Let the first patch fall off and do not pull it
back into the bore.

2. Wet a second patch, and similarly start it into the bore from the
breech, this time scrubbing from the throat area forward in 4-5" strokes
and gradually advancing until the patch emerges out the muzzle. Waiting
approximately 1 minute to let the bore cleaner soak will improve its

3. For pitted, heavily carbon-fouled "rattle battle" guns, leaded
revolvers or neglected bores a bronze brush wet with bore cleaner may be
used to remove stubborn deposits. This is unnecessary for smooth,
target-grade barrels in routine use.

4. Use a final wet patch pushed straight through the bore to flush out
loosened residue dissolved by Ed's Red. Let the patch fall off the jag
without pulling it back into the bore. If you are finished firing,
leaving the bore wet will protect it from rust for up to 30 days. If the
lanolin is incorporated into the mixture, it will protect the firearm
from rust for up to two years. For longer term storage I recommend use
of Lee Liquid Alox as a Cosmolene substitute. "ER" will readily remove
hardened Alox or Cosmolene.

5. Wipe spilled Ed's Red from exterior surfaces before storing the gun.
While Ed's Red is harmless to blue and nickel finishes, the acetone it
contains is harmful to most wood finishes).

6. Before firing again, push two dry patches through the bore and dry
the chamber, using a patch wrapped around a suitably sized brush or jag.
First shot point of impact usually will not be disturbed by Ed's Red if
the bore is cleaned as described.

7. I have determined to my satisfaction that when Ed's Red is used
exclusively and thoroughly, that hot water cleaning is unnecessary after
use of Pyrodex or military chlorate primers. However, if bores are not
wiped between shots and shots and are heavily caked from black powder
fouling, hot water cleaning is recommended first to break up heavy
fouling deposits. Water cleaning should be followed by a thorough flush
with Ed's Red to prevent after-rusting which could result from residual
moisture. It is ALWAYS good practice to clean TWICE, TWO DAYS APART
whenever using chlorate primed ammunition, just to make sure you get all
the residue out.




1. Flammable mixture. Keep away from heat, sparks or flame.

2. FIRST AID, If swallowed DO NOT induce vomiting, call physician
immediately. In case of eye contact immediately flush thoroughly with
water and call a physician. For skin contact wash thoroughly.

3. Use with adequate ventilation. Avoid breathing vapors or spray mist.
It is a violation of Federal law to use this product in a manner
inconsistent with its labelling. Reports have associated repeated and
prolonged occupational overexposure to solvents with permanent brain and
nervous system damage. If using in closed armory vaults lacking forced
air ventilation wear respiratory protection meeting NIOSH TC23C or
equivalent. Keep container tightly closed when not in use.

This "Recipe" is placed in the public domain, and may be freely
distributed provided that it is done so in its entirely with all
instructions and safety warnings included herein, and that proper
attribution is given to the author.

In Home Mix We Trust,


Reply With Quote

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Electronic Rust Prevention MinotJeep Modified Tech Discussion 14 December 9th, 2003 19:28
Good news for us oldsters Eagle Non-Tech / Off Topic 1 December 7th, 2003 21:46
Rust free F/S 1983 Cherokee-original Arizona vehicle Georgia Mike For Sale: Private Party Only. XJ ITEMS ONLY 7 November 21st, 2003 13:45
This is a good read, check it out. Renegade Jpr Non-Tech / Off Topic 2 November 12th, 2003 16:25
Seriously considering Front leaf spring Set-up after today...Please read!! woodkrawler Modified Tech Discussion 29 September 18th, 2003 21:01

All times are GMT -7. The time now is 19:01.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2022, vBulletin Solutions, Inc.
NAXJA and NAXJA logo's Copyright NAXJA. All content/images Copyright NAXJA 1999-2014