• NAXJA is having its 18th annual March Membership Drive!!!
    Everyone who joins or renews during March will be entered into a drawing!
    More Information - Join/Renew
  • Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.

VOTE NOW for FINAL ROUND April 2011 ROTM Chapter Shootout

VOTE NOW for FINAL ROUND April 2011 ROTM Chapter Shootout

  • MATTVW65

    Votes: 41 22.9%
  • BillDunn83

    Votes: 25 14.0%
  • knucklehead 61

    Votes: 49 27.4%
  • Pat

    Votes: 64 35.8%

  • Total voters
    179
  • Poll closed .
From the Intermountain Chapter: MATTVW65

5.5 Rubicon Extreme Duty Long arm Kit
- Acos Spacers Front
- Add a leaf in Rear
- t&t u bolt eliminator kit
-Tom Woods Custom Drive Shaft rear
-4:56 Gears front and rear
-dana 44 rear axle, detroit locker,superior alloy shafts, t&t truss, finned alum cover, custom rock guard
-Dana 30 front axle, with Warn Alloy shafts, Warn Hub Kit, axle truss, teraflex high steer kit otk, alloy usa tube seals, ARB air locker
-ARB compressor
-ARB Snorkel
-Teraflex SYE HD
-ZJ Rear Disc Conversion
-Ruff Stuff Front HPC coated silver
-Warn 9500ti winch
-Bushwhacker Flares
-35x12.50x15 BFG km2 15x8 pro comp alum wheels
-Rock Lights
-HID converson headlights
-Rock hard interior sport cage
-t&t frame stiffaners
-4.0 modifications, banks header, HPC coated silver intake manifold, Rubicon Express 63mm throttle body, magnaflow exhaust, k&n drop in air filter
-JCR rocksliders HPC coated black
-JCR tail light housings "modified"
-ARB roof rack and Eezi-Awn Roof top tent
-tomkin gas tank skidplate
Custom
Front bumper
Rear bumper/Tire carrier




157088_1771970902925_1348845694_1935623_7416287_n.jpg


183342_204547516229531_150034968347453_836607_5499721_n.jpg


2 more pics:
205591_2001964092611_1348845694_2336406_2068724_n.jpg


208559_2001965452645_1348845694_2336407_4410685_n.jpg
 
Last edited:
From the North Atlantic Chapter: BillDunn83

'99 XJ police package
~8" lift
-6.5" big offroad springs and 1.5" spacers to level the front
-6.5" big offroad leaf packs with 1" JKS boomerang shackles
-RE HD trackbar
-adjustable upper and lower CA
-D30 4:10 gears, spartan locker, solid diff cover, custom LCA skids, and minor bracing.
-Ford 8.8 4:10 gears, Ruff stuff bracketry, stock LSD, disc brakes, warn diff gaurd, and axle tubes welded to center section.
-trimmed fenders
-hyline offroad hood vents
-intake and header
-fullsizeXJ front winch bumper
-custom rear bumper with swingout
-smittybuilt XRC10 winch
-35" maxxis bighorns on american racing alloys
-custom cargo box with sub and amp built in
-light bar
-rock rails
-hack & tap

have rock crawler steering to put on along with J20 steering box.

tilt2.jpg



I will edit this and add the second pic when I get home from work.

My second pic since I cant edit the first post...

DSCN1000.jpg
 
From the Sierra chapter: knucklehead 61


my red junk:
1992 xl 4.0 aw4, 231 doubler in front of a d-300 twin stick.
'79 f-350 d-60, spool, 5.38's
chevy 14 bolt rear, spool, 5.38's
rustys craptastic long arms, bilstein 5150's
internal cage, 3/16 plate front & rear fender guards, warn winch w/ rope, 39.5 irocks. cb, bumpers, psc hydro assist, hydro assist brakes, ruffstuff diff covers & frame reinforcements, etc. etc. etc.
c2dabcae.jpg

DSCN6300_edited-1.jpg


2 more pics:

3fb94a49.jpg

DSCN6307_edited-1.jpg
 
Last edited:
From the Midwest Chapter: Pat

1998 XJ
pink2.jpg


Detailed specs...

4.0 w/ Gibson Exhaust
AX15
NP231 w/fixed yoke and cable shifter
Tom Wood's rear shaft, modified stock front shaft
Hybrid cage built by HD Offroad Eng. w/front seats & harnesses
gutted/lined interior

HP D44 front:
5.13
Yukon shafts and super joints
Aussie locker
Warn Hubs
GLO diff cover
Hydro assist
1-ton TREs w/ .250" wall TR & DL

Ford 9" rear:
5.13
31 spline Yukon shafts
full spool
disc brakes and pinion guard

Front susp:
RK 3 link w/center and outer limit straps
6.5" Rusty's coils
Bilstein 5125 12" shocks

Rear susp:
4.5" saggy Rusty's leaf packs
longer shackles (1.75" lift?)
HD shackle boxes
Traction bar tied into tcase belly skid
Bilstein 5125 10" shocks

Misc:
Hanson winch bumper with Warn M8000 and 3/8" winchline
CROK steering box plates
2x6 boxed rockers tied to plated frame rails and cage at A and B pillar
Custom rear bumper
37x14x17 bias IROKs on 17x8 Cragar/GLO DIY beadlocks

I have wheeled this Jeep for 11 years (stock to current) across 6 states from Tellico to Moab.

pink1.jpg


Pics from WF2011, taken by Big Hank. (thanks)

2 more pictures:

DSCF0418.jpg

DSCF1351.jpg
 
Last edited:
Nice rigs everyone! that was a hard choice.
 
Pat gets my vote.
I LOVE the hybrid cage!
All of the guys in this poll have spent enough on their rigs and wheel hard enough that they should already have a cage.

mine does have a cage, although i would prefer an exo cage. i'll build one after i buy a tubing bender. :repair:
 
Back
Top