• NAXJA is having its 18th annual March Membership Drive!!!
    Everyone who joins or renews during March will be entered into a drawing!
    More Information - Join/Renew
  • Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.

sanden compressor OBA

stxcherokee

NAXJA Forum User
ok, i'm stumped.. i have everything to convert stock Sanden on my jeep to oba, but cannot find the correct fittings to hook up to the back of the compressor.

i cut my lines like an idiot. where would i find an ac line to npt fitting, or cheap hoses so i could just cut the hose and barb another hose to it.
 
found a lead.. in case someone tries this in the future..

since onboardair.com is down or not working..

i called up Polar Bear Inc. the guy hooked me up.. we shall see what happens now.. should have oba by this weekend
 
Also, for future reference - any good hose shop can set you up. The trick is finding one if your not in the trucking industry...

-jm
 
I just took mine (on my old '85 XJ) into the hardware store and searched through the fittings until I had everything needed to adapt it together. It took a little effort, but it was cheaper this way.
 
Back
Top