• NAXJA is having its 18th annual March Membership Drive!!!
    Everyone who joins or renews during March will be entered into a drawing!
    More Information - Join/Renew
  • Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.

Front axle off center even with trackbar unhooked

viperbluelx

NAXJA Forum User
Location
Ringgold, GA
I have a 92 with a RC 4.5" short arm lift. When I got it I noticed that the axle was offset approximately 1" to the driver side. It has an aftermarket bracket on the axle end. Anyway I assumed I needed an adjustable track bar so I ordered one. I remove the stock track bar today and much to my surprise there was no pre-load on the bar. After removing the stock bar the axle was still offset to the driver side and you can even see it in the coil springs being tilted. The only way I could get it centered was to put some pretty good pre-load on the adjustable track bar, but that doesn't seem right to me? Any idea?
 
get someone to sit in the drivers seat have them turn the steering wheel till frt of jeep is centerd, then install adj trackbar
 
Back
Top