• Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.

anyone in OC feels like welding a beadlock ring to a rim?

Let me know how that goes. I stupidly bought ten inch wide rims. They've been fine with my 33's but next is 35's and I'm not too confident in that bed at 10psi or less. I've been looking into the weld on locks.
 
Let me know how that goes. I stupidly bought ten inch wide rims. They've been fine with my 33's but next is 35's and I'm not too confident in that bead at 10psi or less. I've been looking into the weld on locks.
 
Weld on beadlocks will make it wider, making the inner bead even more likely to come off.

Might want to start over with some 8 inch wheels
 
00XJinprogress said:
I stupidly bought ten inch wide rims.
Click to expand...

I run 10" rims with 33s and don't expect to have any problems with 35s either. Granted I run 13.5 (14.5) wide Toyo M/Ts. I sit a little wide but it sure is stable, all things considered.
 
You must log in or register to reply here.

Similar threads

blondejoncherokee
can anyone can grab 2 tikis for me in orange? Norcal NAXJA guy asking
Replies
3
Views
458
JohnX
JohnX
Root Moose
Mild Lifting with OEM Parts
Replies
12
Views
1K
Tim_MN
Tim_MN
X
My brakes are crap
Replies
12
Views
3K
xjklmnop69
X
Bent
Thoughts on a small welding table
Replies
5
Views
1K
Anak
Anak
R
93 manual xj intermittently not going into gear
Replies
4
Views
2K
cruiser54
C
Back
Top