• Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.

Cubby sub box build

C

CowboyTex18

NAXJA Forum User
Location
Troup, TX
Hey guys I figured I would share my sub box I built over the weekend. I got tired of my big box for my 12” sub taking space so decided to build one in the useless cubby space. I didn’t take a ton of pictures but here is what I did take. Made it out of 3/4 MDF and graced it out of the cubby I cut out. Cut the template with a jigsaw then used a router to make copies to stack. Then cut the inner hole and routed the copies again. I prefer this method so I could keep the curve without using fiberglass although it is wasteful with wood. Mounted it to the pinch welds behind the panel and the seatbelt bracket. Thanks for looking!
a76c8f122dbf8a8d1461be21bfc9f188.jpg



Sent from my iPhone using Tapatalk
 
Sorry the finished picture looks wet I wiped it off with a damp paper towel. I also forgot to put that I coated it in beldiner to match the floors in the Jeep.


Sent from my iPhone using Tapatalk
 
I took the easy way and just bought the box!
P1080996.JPG
 
I am talking the even easier way out.
Picked up a Mopar spare tire sub.
The harness that comes with it makes it plug and play.
Of course betting that ones you guys installed sound way better.
 
You must log in or register to reply here.

Similar threads

D
Build: "full body" tons and 40s
2 3 4
Replies
65
Views
17K
DrivnXJ
D
M
"PayDay" my 2000 XJ Build,
Replies
1
Views
2K
Muddy98
M
M
"PayDay" my 2000 XJ Build
3 4 5
Replies
87
Views
18K
Anak
Anak
R
NACFest 2019 To-Do list
2 3
Replies
46
Views
5K
chedisme
chedisme
E
My jeep build with photos over the last few years.
44 45 46
Replies
917
Views
192K
Evan03
E
Back
Top