• NAXJA is having its 18th annual March Membership Drive!!!
    Everyone who joins or renews during March will be entered into a drawing!
    More Information - Join/Renew
  • Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.

chassis wire identification, 89 xj

AIbandit

NAXJA Forum User
NAXJA Member
Location
Chico, CA
Fuel pump wires at kick panel, 89 xj

I need to identify the wires on this connector. Hopefully it's the one with the fuel pump

I'm connecting it to an 88 MJ harness that has a different color code and less wires.

So far I have
Brown right turn lights
Drkblue running lights

Really just need to know the fuelpump wires (hot and sender) can't find a diagram that says anything on that side.

UAgPnQF.jpg
 
Last edited:
For that connector:
1- GY/RD Park Brake Switch
2- PK Cargo Lamp Feed
3- LB/BK Stop Lamps
4- DB Illumination Relay
5- BR Right Turn Rear
6- TN Fuel Guage
7- BR/WT Left Front Door Jamb Switch
8- BK/WT Courtesy Lamps
9- BK/WT Left Turn Rear
10- WT Sealt Belt Switch
 
Should be a similar 10-pin grey connector on the left kickpanel area. Pin #10 for the fuel pump is a PK/BK wire.

Thank you so much.
Do you have the gray connector wires too?
I hoped they'd match up to the mj gray but apparently not.
 
Back
Top