I hope this hasn't been beat to deaqth but searching reveiled nothing. Here is what I have. D44, 5.13 gears, was open just installed Lock Right, warn hubs/ and MM hubs, Chevy knuckles small bearing spindles and brake backing plates, Ford hubs and rotors. Rear is a spooled 9" with 5.13 gears. Tires are 35". I have blown 4 locking hubs now. 3 on the passenger side and one on the drivers side. what can be causeing this? I am not running the small snap ring either. removed after the first 2 warns blew. I am about to put the hub flanges on but am afraid to break something bigger up stream. BTW front was open when hubs were blowing.