Spidey
NAXJA Forum User
- Location
- Wichita, KS
...possible causes?
All other gauges are working properly.
Bad gauge maybe?
This is on a '92 XJ
All other gauges are working properly.
Bad gauge maybe?
This is on a '92 XJ
-
Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.
Voltage gauge not working...
- Thread starter Spidey
- Start date
- Location
- Terra Firma
What does "not working" mean? The needle doesn't move at all? Or the gauge is not accurate?
Spidey
NAXJA Forum User
- Location
- Wichita, KS
Sorry, forgot to specify.
Needle is dead, no movement at all.
Needle is dead, no movement at all.
Spidey
NAXJA Forum User
- Location
- Wichita, KS
Also forgot to add -
I pulled the gauge pod to make sure that all of the harnesses were plugged in and that the screws that hold that gauge in place are tight.
I pulled the gauge pod to make sure that all of the harnesses were plugged in and that the screws that hold that gauge in place are tight.
- Location
- Terra Firma
Next step (unfortunately) is probably to pull the gauge pod (again) and apply 12 volts directly to the contacts on the back of the voltmeter to see if that'll wake it up.
Spidey
NAXJA Forum User
- Location
- Wichita, KS
OK, I'll try that and see what happens.
Hopefully I just need to replace the gauge.
Thanks for the info!
Hopefully I just need to replace the gauge.
Thanks for the info!
