• NAXJA is having its 18th annual March Membership Drive!!!
    Everyone who joins or renews during March will be entered into a drawing!
    More Information - Join/Renew
  • Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.

my switch box/temp gauge creation

white_elephant

NAXJA Forum User
Location
miami
DSC_0089.jpg


i got my write up from here...
http://fitchva.com/jeep/?p=42

i ran out of switches...(lil sis)....so im getting more later...its suppose to be 6....
1 for the 2 lamps on the roof.
1 for the other 2 lamps on the roof.
1 for the fog lamps in the front bumper.
1 for the two lamps in the back of the rack.
1 for the air compresor.
1 empty for w.e the heck i mount...may be those lamps that go under the rig... ..
and the temp one for the tranny..
1 for the
NOTE:" BEFORE YOU SAY ITS NOT ALIGNED I TRIED TO DO IT..AND IT WOULNDT FIT BECAUSE THEY ARE SO CLOSE SO I HAD TO RE DO IT AND DO IT LIKE THAT...
 
The right side switch is higher then the left? Not sure if that is what you are talking about by not being "aligned" but I would do it over if that is the case with different switches. JMO
 
Back
Top