• NAXJA is having its 18th annual March Membership Drive!!!
    Everyone who joins or renews during March will be entered into a drawing!
    More Information - Join/Renew
  • Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.

coil bucket angle to pinion and C

wait a minute dude! you don't know what mr MJ was building his for. could be for trips to the mall. KIDDING!!

but seriously, each axle should be set up for the suspension on a rig.

Smokey, what lift you running?

i'll be burning a truss on my 44 soon and shooting for 13* c vs pinion difference. will be for right at 6" of lift on an XJ with long arms.
 
wait a minute dude! you don't know what mr MJ was building his for. could be for trips to the mall. KIDDING!!

but seriously, each axle should be set up for the suspension on a rig.

Smokey, what lift you running?

i'll be burning a truss on my 44 soon and shooting for 13* c vs pinion difference. will be for right at 6" of lift on an XJ with long arms.

Haha, 4.5" 3 link up front currently. Only question then is dont you still need to rotate the Cs to not kill your caster?
 
Back
Top