Anyone know of a place to get one? Long story short the previous owner dropped the trans and tcase but didn't unhook all the senors and trashed the harness. It has been hacked together and pinched multiple times between the trans and fire wall while they did whatever they did. I'm 99% sure it is what is causing my CEL for codes p0720 and p0700. The output shaft speed sensor is new with a new plug. I've swapped the sensor twice so I don't think its that. It also occasionally effects my part time 4wd light on the dash when I engage the 4wd.
So like I said I am guessing the harness or maybe the ecm. Is the trans controlled by the ecm or does it have a separate controller? Kid that had my jeep before me blew the np242 and swapped a donor trans with a np231 hooked to it into the jeep. He also snapped a bolt off in the torque converter and a few other things but those have all been fixed
Oh even with the CEL and codes my jeep still runs shifts and drives as well as I think it should. Don't feel any hiccups or anything. Its just real real annoying and messes with my ocd.
part number off my tag on the harness i need is P56009385
So like I said I am guessing the harness or maybe the ecm. Is the trans controlled by the ecm or does it have a separate controller? Kid that had my jeep before me blew the np242 and swapped a donor trans with a np231 hooked to it into the jeep. He also snapped a bolt off in the torque converter and a few other things but those have all been fixed
Oh even with the CEL and codes my jeep still runs shifts and drives as well as I think it should. Don't feel any hiccups or anything. Its just real real annoying and messes with my ocd.
part number off my tag on the harness i need is P56009385
Last edited: