Wikkid98xj
NAXJA Forum User
- Location
- NJ
Does anyone know the pn. For the johnny joint upgrade for the d30 axle mount bushings
Sent from my SM-G986U using Tapatalk
Sent from my SM-G986U using Tapatalk
-
Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.
Johnny joints
- Thread starter Wikkid98xj
- Start date
- Location
- West Sacramento, CA
Wikkid98xj
NAXJA Forum User
- Location
- NJ
RCP Phx
NAXJA Forum User
- Location
- Phoenix,Az
- Location
- Virginia City, NV
Ive used these a few times as well. They work well. They also have a 1/2” bolt version.
https://www.ironrockoffroad.com/product/upper-control-arm-flex-joint-8-bolt-10mm-cartridge.html
https://www.ironrockoffroad.com/product/upper-control-arm-flex-joint-8-bolt-10mm-cartridge.html
Last edited:
- Location
- West Sacramento, CA
Careful you don’t tear off the passenger side upper control arm mount from the axle if you use all hard joints.
- Location
- In a strange land
That is a very good point.
And probably the reason there is a kit for these that includes a solid steel insert for the passenger side, intended to be welded to the axle tube.
- Location
- Illinois
The IRO joints are great, I know plenty of people running em.
I actually have a press in style one I could sell cheaper, I need a weld on version for my new swap so it's just collecting dust
Sent from my Pixel 3a using Tapatalk
