I've got some issues when the motor is cold and figured I'd ask around to try any find possible causes before throwing money at it.
Symptoms are as follows
Hard to start, takes 3-4 tries before it will stay running.
Dies if I touch the throttle
Shakes a bit
After about 1 minute I can start to rev it without it dying, but it will stumble and hesitate.
After about 2 minutes it revs normally, maybe a bit sluggishness.
Once it reaches 50c on the temp gauge, it's at full power.
So far I've checked for vaccum leaks, couldn't find any.
Compression is a little low on one cylinder.
I've read that the egr might be the issue, how do I test it? Also, how does it work? It runs on vacuum, does that mean that if it's bad it can cause a vaccum leak?
Symptoms are as follows
Hard to start, takes 3-4 tries before it will stay running.
Dies if I touch the throttle
Shakes a bit
After about 1 minute I can start to rev it without it dying, but it will stumble and hesitate.
After about 2 minutes it revs normally, maybe a bit sluggishness.
Once it reaches 50c on the temp gauge, it's at full power.
So far I've checked for vaccum leaks, couldn't find any.
Compression is a little low on one cylinder.
I've read that the egr might be the issue, how do I test it? Also, how does it work? It runs on vacuum, does that mean that if it's bad it can cause a vaccum leak?