xjaddiction
NAXJA Member #666
I've started my new project, an '88 MJ. So... I have a bunch of stuff for sale off of it. I would love to sell this stuff locally.
I have,
lift that will get the front end up to 7 to 7.5"s, consists of; $100
-F150 coils, and a home made BB
-Tereflex track-bar (could use a new TRE), non-adj.
-Home-made drop bracket for upper and lower CA's, this will work for a 7"
to a 10" (originally made for a 10" lift on a XJ) lift. will work fine with your stock CA's
The rear springs I'm keeping for the project
Axles, complete set; $450
Dana 30 HP with working vacume DC, 4:56 gears, steering stock. This is a 4-link (well 5 with the t-bar) coil sprung MJ's TJ's and XJ's, I guess ZJ's too.
Dana 35C with 4:56 gears, Lock-rite, Diff guard, ZJ disc brakes, new pinion seal.
Tire and wheels; 4 of them
-SS TSL Bias Ply 36x12.50x15 , very good shape 40 to 50% tread left $300
-on 15x10 Ultra aluminum wheels with 3.75 bs 5 on 4.5 pattern $100
Give me an offer on the whole thing, or get what you need.
Thanks, Greddy
I have,
lift that will get the front end up to 7 to 7.5"s, consists of; $100
-F150 coils, and a home made BB
-Tereflex track-bar (could use a new TRE), non-adj.
-Home-made drop bracket for upper and lower CA's, this will work for a 7"
to a 10" (originally made for a 10" lift on a XJ) lift. will work fine with your stock CA's
The rear springs I'm keeping for the project
Axles, complete set; $450
Dana 30 HP with working vacume DC, 4:56 gears, steering stock. This is a 4-link (well 5 with the t-bar) coil sprung MJ's TJ's and XJ's, I guess ZJ's too.
Dana 35C with 4:56 gears, Lock-rite, Diff guard, ZJ disc brakes, new pinion seal.
Tire and wheels; 4 of them
-SS TSL Bias Ply 36x12.50x15 , very good shape 40 to 50% tread left $300
-on 15x10 Ultra aluminum wheels with 3.75 bs 5 on 4.5 pattern $100
Give me an offer on the whole thing, or get what you need.
Thanks, Greddy
