mhead
NAXJA Forum User
- Location
- Encinitas, CA
OOPS... The internal bore is 1.050" ID out at the bolt head, but at the point where the o-ring seal is made the bore is 1.002" This changes the o-ring choice
Internal adapter to bolt:
Adapter bore ID: 1.002”
Groove OD: 0.836”
Groove Width: 0.145
Seal type: static bore seal
O-ring: 2.5 mm X 20 mm Buna-N 70 durometer
Stretch: 6%
Squeeze: 15%
Please ignore the above information for Internal adapter to bolt!
Internal adapter to bolt:
Adapter bore ID: 1.002”
Groove OD: 0.836”
Groove Width: 0.145
Seal type: static bore seal
O-ring: 2.5 mm X 20 mm Buna-N 70 durometer
Stretch: 6%
Squeeze: 15%
Please ignore the above information for Internal adapter to bolt!