- Location
- Torrance, CA
Deaver springs are longer than stock.
They are on the correct directionare the leaf springs in the correct direction?
Yep...the no lift shackle boxes cut out the stock shackle mount right?
Can the no lift brackets be flipped around, reversed?
I would move the frame shackle mount location back one more. I know it looks like you will loose lift. But i bet it will get the shackle angle back closer where it needs to be. I have the same relocation kit with longer than stock leafs. I used the boostwerks shackle to gain back a bit if lift. But the nolift boxes helped a ton with rear body roll. Not sure why but body roll was way better with them than the previous setup with the drop boxes and same leafs and shorter shackles.
I actually tried. The nut for the shackle won’t fit. There’s a Bend right behind that hole and the nit won’t actually sit flush. I’ll probably just fab up something simple and bolt in.
You have to notch that original shackle mount back before you install the box. Part of the install instructions i think. I ended up using that same hole.
Yea it’s super simple. But it’ll work just fine.Crossmember looks good. Very similar to how mine turned out when i swapped in my atlas.