ftwelder
NAXJA Forum User
- Location
- Rockinham, Vermont
Not really concerned with the tapping its the turning radius. Both Durango boxes I've put on my MJ's have had a pretty significant reduction with the turning radius. There's a writeup around here on how to rectify it but its been a few years since I looked into it.
You remove a snap ring from near the input end of the main bore and machine or grind off some bumps inside the aluminum end cap at the front end of the main bore. This allows the same degrees of rotation as a standard box. You will also need to move the mounting points away from the frame rail a little further to compensate for the bigger chunk.