-
Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.
Drop Bracket LCA and UCA length
- Thread starter XJDave
- Start date
bill hitchcock
NAXJA Forum User
- Location
- houston
tops are 15 bottom are 16. for most lifts unless you got something crazy.
ChuckD
NAXJA Forum User
- Location
- Kerman, CA
Well, it's more of a caster adjustment than just using someones lengths. That will get you started, but you really need to check the caster about 7.5*, that's the point of having adj. uppper arms anyway.
gearwhine
NAXJA Forum User
- Location
- Denver, CO
It depends on your lift height...there is no set length on control arms no matter what you have done. I would rough estimate the lowers and get fixed ones, and then get adjustable uppers to set caster, and pinion angle. I'm sure if you call RE they would help you out.
gearwine... you are right of course... I guess what I wanted to know was if using the drop brackets would require a set amount of added length to the arm length I would normally have used with the arms in the stock locations.
I will call RE tmrw and see what they have to say...
Thanks for the help guys,
-Dave
I will call RE tmrw and see what they have to say...
Thanks for the help guys,
-Dave
ChuckD
NAXJA Forum User
- Location
- Kerman, CA
bill hitchcock
NAXJA Forum User
- Location
- houston
what lift are you running ive got a chart that can figure out the lengths.