Hey yall i have 180k on this engine. I just replaced the whole cooling system besides the heater core. Well when removing the thermostat i saw a lot of deposits after flushing the shit out of it so i decided to run an acid flush thru the system. I went for a couple mile trip to get it running thru and i did not get the lower radiator hose on all the way . It came off and i overheated enough to get smoke from the valve cover and out the radiator fill. I did a exhaust leak test kit and found nothing. I did a compression test and my numbers were 130 130 135 130 140 130.....i was happy woth all this after just investing all this money into this jeep and it being my daily driver. I was planning on putting a new axle and some other suspension work to dial it in when i got my report from blackstone below. What do you all think about these results. I drove it up north and back 500 mile round trip. Im thinkkng it should bot be driven anymore and its the weekend so i just want to start tearing stuff apart but inwant some1 with me thay knows what theyre doing or atleast a new head ready to go in because it will rust if i have it open for long?? I dunno just putting this put there to see what people think i know