NAXJA Forums -::- North American XJ Association  

Go Back   NAXJA Forums -::- North American XJ Association > NAXJA Other Technical Forums > JeepSpeed, Prerunner and Competition Tech Forum
HOME Member FAQ Sponsor Info Rules Bylaws E-Mail

JeepSpeed, Prerunner and Competition Tech Forum For Discussion of Modications related to Prerunning, JeepSpeed, KOH, Rock Racing, and any other speed based competitions

 
 
Thread Tools Rate Thread Display Modes
Prev Previous Post   Next Post Next
  #1  
Old June 17th, 2016, 13:09
CherryXJ CherryXJ is offline
NAXJA Forum User
 
Join Date: May 2016
Location: Southern CA
Posts: 10
4600 Class KOH XJ

Hi I have been lurking on for a while now and I have had my XJ for about a year. Last February I went down to KOH and I was hooked. A couple of the racers in the 4600 class are actually from my town and I have been talking to them and their hobby has rubbed off on me and now here I am

So about my XJ. Meet Cherry



I have had her for a little over a year as of now, when I got her she had a lift and 32's. Front axle is a Dana 30 and rear is an 8.25 limited slip.



Since then I have done a lot of small projects/upgrades. Started with SYE then replaced the rear leafs to fix the saggy ass, XRC Bumpers, yellow top optima, Lights, new shift linkage etc. Got around to cutting the fenders to fit my Dick Cepek 35's



Oh somewhere in there I painted my grill



So as it sits now





I have not done anything huge to it but I have big plans. Although I have an idea of what I want, this is going to be a long build as I am going to be a senior in high school and while I work full time over the summer, I can't get as many hours through school so I am hoping to be able to run KOH in 2018. I'm not bummed with it taking so long because I am still fairly new to all of this. I'm always lurking on forums learning anything I can and I go out wheeling all the time but racing is something else and it will give me time to make sure my build is where I want it and I know what I am doing.

Okay now that that is all said, here is my plan!

I am under the impression that to race in KOH you have to qualify by placing top 5 in any other race correct? If that is so, I plan on racing in Glen Helen in 2017 as that will give me about a year to get ready, and then hopefully racing 8 months later in KOH.

My biggest concern is my Dana 30. I know guys that crawl up damn near anything with one, I know guys that swear its the devil. I am going to build it to be strong as shit and if everything goes how I would like I would swap for a better axle in between Glen Helen and KOH.

I will be putting in Ten 30 Spline chromoly axles and an Eaton E locker with 4.88 gears. I also read about a reinforcement kit from poly for the tubes I'd like some opinions on:
http://www.polyperformance.com/Syner...xle-Sleeve-Kit
Worth it? Would it help much?
I also want to truss the front axle well so it has as much support as it can get, upgrade knuckles, high steer, etc. I have not decided on which ones to go with there but I know I will want it.

After that, I plan to get bucket seats and 5 point harnesses and start on the cage. Then suspension, which I would love to hear suggestions for. I have read about all the 3 Links, Radius arms, 4 Links, pros/cons of each and I would like to hear your thoughts. I know the full traction kit has a good rep but if I could build something similar for less than $1000 I am all for it. Welding is not an issue although I am by no means a fabricator, I plan to learn eventually so I will get better as the build progresses.

I am open to any criticisms, suggestions, questions, help, or sponsorships

Like I said this will be a slow moving, long build but I will be updating with everything I do. Let me know what you think!
Reply With Quote
 


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
(4) Bilstein HD 4600 series shocks (0-2") $70 streetpirate NorthWest For Sale/Wanted 1 August 13th, 2015 11:35
Four Corners 4600 Class TJ Clayton Off Road Jeep Picture Showcase 0 November 12th, 2013 10:43
Non Jeep--- Rustler w/MM 4600 tharlanjr SoCal For Sale 4 January 30th, 2010 01:06


All times are GMT -7. The time now is 18:05.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2021, vBulletin Solutions, Inc.
NAXJA and NAXJA logo's Copyright NAXJA. All content/images Copyright NAXJA 1999-2014