NAXJA Forums -::- North American XJ Association  

Go Back   NAXJA Forums -::- North American XJ Association > NAXJA Unibody Jeep Technical Forums > Jeep Cherokee XJ (1984 - 2001) > Modified Tech Discussion
HOME Member FAQ Sponsor Info Rules Bylaws E-Mail

Modified Tech Discussion Forum for Tech related discussion for Modified XJ's and MJ's.

Reply
 
Thread Tools Display Modes
  #1  
Old March 23rd, 2017, 13:48
01classicxj's Avatar
01classicxj 01classicxj is offline
NAXJA Forum User
 
Join Date: Sep 2013
Location: Dickinson, TX
Posts: 18
4wd conversion...just saw a couple of issues..

Hello all. I am closer to starting on the finish of my 2wd to 4wd conversion. So i went to my storage to look at the 1999 tranny/transfercase sitting there. They are still mated. Wiring harness, dipstick tube in there as well. Pulled both driveshafts off to make handling easier. It's laying across a four wheel dolly. My question is about hooking up the speedometer that the sensor is now in the transfer case. It has three spade connector and what is the other big round thing with a plug sitting straight up on the transfer case. I crawled under my cherokee and looked at the 2wd connections. It seems that my speedometer connection might stretch further back once i install the 4wd tranny /transfer case. I unplugged my 2wd connection and it has three spades as well. Is this correct?
Reply With Quote
  #2  
Old March 23rd, 2017, 14:44
Francesco Francesco is offline
NAXJA Forum User
 
Join Date: Dec 2015
Location: Ventura County
Posts: 130
Re: 4wd conversion...just saw a couple of issues..

When I did my 4wd swap, I took out the entire sensor from the tailshaft, as my donor tranny had an electronic one, and mine was cable, and installed my entire unit from the old to the new. Hope this helps.
Reply With Quote
  #3  
Old March 23rd, 2017, 15:58
cal's Avatar
cal cal is offline
NAXJA Warranty Voider
 
Join Date: Nov 2004
Location: Hammertown, USA
Posts: 16,891
Re: 4wd conversion...just saw a couple of issues..

I swapped the sensor from my 00 2wd trans into whatever t-case i swapped in and went with it
__________________
I'm not a complete idiot - there are parts missing.
Reply With Quote
  #4  
Old March 24th, 2017, 19:02
01classicxj's Avatar
01classicxj 01classicxj is offline
NAXJA Forum User
 
Join Date: Sep 2013
Location: Dickinson, TX
Posts: 18
Re: 4wd conversion...just saw a couple of issues..

So i figured out the other connection on the transfer case might be the VIC. I can get away with not hooking that up right? I dont think it directly effects the 4 wd system. I dont need a light telling me what range i'm in.
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Reset ECM, solved a couple issues at first. Pchitti OEM Tech Discussion 16 February 10th, 2015 17:04
I have a couple of issues.... techno1154 OEM Tech Discussion 3 August 12th, 2014 18:36
Couple issues Apostle Colorado Chapter 3 December 2nd, 2010 10:03
84 pioneer has a couple issues... thechief86 OEM Tech Discussion 9 September 25th, 2010 18:07
Couple renix issues.. GarageAlchemist OEM Tech Discussion 12 January 11th, 2010 15:00


All times are GMT -7. The time now is 04:14.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
NAXJA and NAXJA logo's Copyright NAXJA. All content/images Copyright NAXJA 1999-2014