• NAXJA is having its 18th annual March Membership Drive!!!
    Everyone who joins or renews during March will be entered into a drawing!
    More Information - Join/Renew
  • Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.

Steering/Stock Axles/Brakes/Etc

Unearthed

NAXJA Forum User
Location
West Point, NY
Going through a new build. Have to get rid of some stuff to make room for others. Will have a lot more coming as I make my way through the years of parts and items. All listed is currently in Brooklyn, NY but can deliver to certain areas possibly;


-RockJock CE-9701 CURRECTLYNC Jeep Heavy-Duty Tie Rod System ($450)

The RockJock heavy duty tie rod and drag link system for TJ, LJ, ZJ, XJ, and MJ vehicles features a 1 1/4" diameter forged chrome moly drag link, 1 1/4" chrome moly bar stock tie rod that is bored and threaded on the ends. All 7/8" thread tie rod ends with urethane boots, and jam nuts are included. This unit is a direct replacement for the stock unit - no modifications or machining to any part of the vehicle is necessary.

Designed for stock height or up to 6" lifted vehicles

Fits:

1997-2006 Jeep TJ Wrangler (all models)
2004-2006 Jeep LJ (Unlimited) (all models)
1984-2001 Jeep XJ (Cherokee)
1986-1992 Jeep MJ (Comanche P/U)
1993-1998 Jeep ZJ (Grand Cherokee)
No stabilizer attachment available. Painted with spray paint, could easily go back to black.

https://www.rockjock4x4.com/CE-9701-TJ-LJ-XJ-MJ-ZJ-Currectlync-Steering-System



-Dana 30 High Pinion 3.55 Gears 100k miles on them (free)

-WJ Hubs used, 30k miles (free)

-Stock D30/8.25 Covers (free)

-2WD WJ axle (stripped it for knuckles/brakes) Would be a cool swap for a gasser, etc.

-WJ Stock steering (free)

-D30 Low pinion, no carrier. Had 4.88’s. Need to be replaced. New rotors, new pads. Has shafts. ($100)

-8.25, stripped to bare housing, was going to use until I found a 8.8. ($50)

-8.25 29 spline shafts ($50). Needs new studs.

-8.25 lincoln locked carrier with 3.55 gears ($50). Worked fine for 20k miles.

-ZJ->XJ disc swap for 8.25, have brand new pads and rotors. All parts here except parking brake ($200)
 
Interested in the steering, but also how old and how beat is it?

Couple of years old. Not terribly beat. I would run it, except went with WJ knuckles. https://www.facebook.com/marketplac...e=marketplace_search&referral_story_type=post

That's my link that's on FB. I have no idea on how to post pictures on here anymore.:confused1

https://www.rockjock4x4.com/product...-currectlync/tj-lj-steering-replacement-parts Currie still makes all the replacement parts for it too.
 
You have host pics somewhere like imgur or your favorite site then link them to your post here.
 
Back
Top