My RE HD trackbar is too short.
I just installed the RE5.5 lift kit, and when the axle is centered the TB joint is screwed on by only 4 turns. So, I got the longer coupler as discussed here...
http://www.naxja.org/forum/showthread.php?t=55507&highlight=1660+threads
I got the coupler without the joint... I am going to swap the joint over from the short coupler.
I am trying to find out how much torque is required for the threaded insert before putting in the set screw. I've emailed RE 3 times now with no response.
Thanks for any help.
I just installed the RE5.5 lift kit, and when the axle is centered the TB joint is screwed on by only 4 turns. So, I got the longer coupler as discussed here...
http://www.naxja.org/forum/showthread.php?t=55507&highlight=1660+threads
I got the coupler without the joint... I am going to swap the joint over from the short coupler.
I am trying to find out how much torque is required for the threaded insert before putting in the set screw. I've emailed RE 3 times now with no response.
Thanks for any help.