• NAXJA is having its 18th annual March Membership Drive!!!
    Everyone who joins or renews during March will be entered into a drawing!
    More Information - Join/Renew
  • Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.

Alternative to Rusty's intake tube for Reni or HO.

Monster3663

NAXJA Forum User
Location
Placitas, NM
This was how I did my intake tube. It works just as good as Rusty's airtube. The whole setup was $40.00 at Autozone. Rusty's tube and filter plus shipping about $90.00

This is a 6X3 inch air tube $9.99 and a 6.5 inch filter $19.99.



Vacuum sensor tube. $9.99



Put together with a piece of metal stock. Hole drilled in 6 inch tube and bolt inserted from inside out to hold bracket. Bottom of bracket uses same bolt that holds air box down.





Can be used with or without vacuum to EGR if not renix. One hose to vent, one hose to canister and the vacuum to EGR if needed.



I got rid of vacuum mess on Renix and and ran each hose individually. I cut the end off the old vacuum adapter.



The completed project.



http://www.naxja.org/forum/images/smilies/pirateflag.gif
 
Looks a heck of a lot better than the Rusty's setup too!

Just a note for us jerks in CA this will NOT pass CA smog inspection, but neither will the Rusty's setup so I guess that's a moot point.
 
Will this same set up work for a 2001?
 
Back
Top