BPB
NAXJA Forum User
- Location
- Battle Ground, Washington
Ok I'll see you tomorrow afternoon
-
Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.
planning a work party at my shop thinking 3/16/13 and 3/17/13
- Thread starter SPECFab
- Start date
BPB
NAXJA Forum User
- Location
- Battle Ground, Washington
what time will you be up today? im not going to sleep till later so i could be there around 9
Mtb Jak
NAXJA Forum User
- Location
- Seattle WA
On the way and hung over! 
BPB
NAXJA Forum User
- Location
- Battle Ground, Washington
Thanks again for the help!!!!
Gold Cobra
NAXJA Forum User
- Location
- Woodland, WA
Thank you SPECfab for hosting this event. It's amazingly generous of you guys to open up your shop and let all these
dum-dums use your tools and your workspace. I'm very grateful, as I'm sure everyone else is too. It was a really fun time, thanks.
flash2pablo
NAXJA Forum User
- Location
- Vancouver, WA
Big Thanks for the help on my front bumper and for mounting and balancing my wheels/tires. Saved me a ton of time in my garage without the proper equipment!
It was great to meet you all too!
It was great to meet you all too!
Red91Laredo
NAXJA Forum User
- Location
- Portland, Oregon
Thanks again SPECFab for the huge amount of help and for inviting everyone to come hang out. It was cool to meet you all!
- Location
- Vancouver, WA
I love your welder, it made Darren's Helen Keller welds look good!!
- Location
- NE Texas
am i too late for a Head swap? hahaha
Thanks go to SPECfab for letting all of us come up and destroy your shop and driveway. It's nice to have the tools available to do most work. It was a fun, productive weekend for most. Here are some pictures.
Mnkyboy's Comanche of the month on Comanche Club
Ruger81's Cherokee
Mnkyboy's Comanche of the month on Comanche Club
Ruger81's Cherokee
Mtb Jak
NAXJA Forum User
- Location
- Seattle WA
First off! Thanks SpecFab! arty:
Wish I could of come for the whole weekend, It was good to meet some of you and put some names, faces to user names!
Projects are a bit easier on a lift.
Sexy new Relocated sway bar axle mounts.
Out with the old greasy garbage!
Used the Anti-Rock nutsert and the whole aluminum support is mounted to the bottom of the AJ's bumper up into the "frame-rail". Really beefy and ties it all together. Had to drill the front hole through the bumper and jeep frame but quick work while on the lift.
I really need a camera with a macro setting... ugh
Still gonna play around with the mounting hole and see where I like it, I have it pretty tight right now, it feels just like when I was connected with the JKS sway-bar if not tighter.
Clearenced my relocated shackle mounts.
Plasma cutter FTW!
Gotta get under with the grinder and clean it up a little bit and throw some paint on all the new welds and cuts!
No more Exhaust rattle!! fixed the mount and re-welded it!
The following day (Monday) we started on the gears!
arty:Wish I could of come for the whole weekend, It was good to meet some of you and put some names, faces to user names!
Projects are a bit easier on a lift.
Sexy new Relocated sway bar axle mounts.
Out with the old greasy garbage!
Used the Anti-Rock nutsert and the whole aluminum support is mounted to the bottom of the AJ's bumper up into the "frame-rail". Really beefy and ties it all together. Had to drill the front hole through the bumper and jeep frame but quick work while on the lift.
I really need a camera with a macro setting... ugh
Still gonna play around with the mounting hole and see where I like it, I have it pretty tight right now, it feels just like when I was connected with the JKS sway-bar if not tighter.
Clearenced my relocated shackle mounts.
Plasma cutter FTW!
Gotta get under with the grinder and clean it up a little bit and throw some paint on all the new welds and cuts!
No more Exhaust rattle!! fixed the mount and re-welded it!
The following day (Monday) we started on the gears!
NW99XJ
NAXJA Forum User
- Location
- Gresham, Or.
It's awesome to see chapter members come together like this, and get SO much accomplished.
I wasnt there, (wish I could have been), but I'll extend a big thanks to the generous hosts at Specfab for making this possible.
Good work guys, and thanks for the pics MTB_JAK!
I wasnt there, (wish I could have been), but I'll extend a big thanks to the generous hosts at Specfab for making this possible.
Good work guys, and thanks for the pics MTB_JAK!
WillCherokee
NAXJA Forum User
- Location
- Tacoma, WA
You should have another shop party. I'd come (esp if I get my Jeep rolling)
Similar threads
