hot_rod_hooligans
NAXJA Forum User
- Location
- Indianapolis
I've recently switched all of my lighting over to LED(with the exception of headlights). I have the LED flasher relay so hyper flashing isn't the problem. My problem is when I hit my brakes(no lights on) the dash and front parking lights light up a little. With my parking/headlights on, the turn signal indicators on my dash light up, maybe 50% power, they flash dark and full power when I hit my turn signals/hazards. I also have "switch back" LEDs in the front, the way they are supposed to work is: they are white as a parking/marker light, hit the turn signal and they flash amber, then switch back to white when the turn signal turn off. They don't do that. Most of the time they stay amber, unless I just have my parking lights on, then they are white. But most of the time, once I switch my headlights or fog lights on, they switch to amber. Driving around at night, sometimes they do switch back to white, so I have one white, one amber, driving down the road, and eventually they seem to switch to amber. So, basically the switch back bulbs work the way they are supposed to about 50% of the time.
I've tried regular LED bulbs in the front, but the low/high function was very minimal, and almost not visible, at least with the switch back bulbs it flashes on/off.
Any suggestions as to fixes? I tried the load equalizers before, it just made the stock flasher buzz if I had the parking lights on.
I've tried regular LED bulbs in the front, but the low/high function was very minimal, and almost not visible, at least with the switch back bulbs it flashes on/off.
Any suggestions as to fixes? I tried the load equalizers before, it just made the stock flasher buzz if I had the parking lights on.