wrecklaw71
NAXJA Forum User
- Location
- Indiana
I have an 01 xj when is it really necessary to install frame/unibody strengtheners? and what brand would you guys recomend.
Mike L said:Check THIS product out from TNT Customs. I wish that would have been around before I plated my frame.
-Mike
XJZ said:What are you trying to accomplish?
These frame sleeves will help protect the frame, but won't help too much as far as the frame flexing torsionally.
XJZ said:What are you trying to accomplish?
These frame sleeves will help protect the frame, but won't help too much as far as the frame flexing torsionally.
wrecklaw71 said:most of the ones i have seen connect the front lower control arm frame bracket to the front rear leaf spring hangar bracket
XJZ said:What are you trying to accomplish?
These frame sleeves will help protect the frame, but won't help too much as far as the frame flexing torsionally.
MaXJohnson said:x2, until XJEEPER and others can offer something more than rhetoric to prove you wrong.
The floor pan is already the strongest side of the XJ's torsion box. An X or shear panel behind the rear seat along with reinforcment around the A pillar-roof intersection and other corners in the door openings would do more to stiffen up the chassis
MaXJohnson said:x2, until XJEEPER and others can offer something more than rhetoric to prove you wrong.
The floor pan is already the strongest side of the XJ's torsion box. An X or shear panel behind the rear seat along with reinforcment around the A pillar-roof intersection and other corners in the door openings would do more to stiffen up the chassis
motorcityxj said:Does anyone here have them yet ?
formatt said:right here... I'm also running the TnT XJLA setup with crossmember.
coming from experience with this setup, it DOES help stiffen everything up. it's like night & day.