Ok, so I've read numerous threads on swapping AW4's to AX15's, but am hoping to verify a few points.
I'm swapping a 98 4.0l engine and AX15 into a 96 with 4.0l and AW4.
I've read to gather the following from the donor car:
Engine
AX15 Trans
98 ECU
Shifter and baseplate(under carpet)
Pedal assembly
Clutch hydraulics
Crossmember (?)
Both driveshafts
T-Case linkage
Reverse light wiring
I understand that I'll need to unplug the TCU, and wire up the reverse lights and fool the neutral safety switch by grounding.
Should I have any trouble using the 98 ECU in a 96?
I read in one post that I'll have to redrill to mount the t-case linkage... Is that so?
Any other issues/parts I'm going to need?
Thanks in advance!
I'm swapping a 98 4.0l engine and AX15 into a 96 with 4.0l and AW4.
I've read to gather the following from the donor car:
Engine
AX15 Trans
98 ECU
Shifter and baseplate(under carpet)
Pedal assembly
Clutch hydraulics
Crossmember (?)
Both driveshafts
T-Case linkage
Reverse light wiring
I understand that I'll need to unplug the TCU, and wire up the reverse lights and fool the neutral safety switch by grounding.
Should I have any trouble using the 98 ECU in a 96?
I read in one post that I'll have to redrill to mount the t-case linkage... Is that so?
Any other issues/parts I'm going to need?
Thanks in advance!