• NAXJA is having its 18th annual March Membership Drive!!!
    Everyone who joins or renews during March will be entered into a drawing!
    More Information - Join/Renew
  • Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.

what size sway in a 96?

my65289stang

NAXJA Forum User
Location
Phoenix, AZ
What size is the front sway bar on a 96 cherokee sport 4.0 4X4? I need new bushings and the parts store lists 24, 25, 26, and I think 28mm. I tried to measure the circumfrence and do it that way but within one milimeter one way or another Im not too sure about it.

Thanks
Brian
96 cherokee sport 4.0 4X4
65 mustang 347, 5 speed
 
Just lay a tape measure across the bar and eyeball it. That's the way I did it.
 
Could be just about anything. The front swaybar seems to be one of those parts that Jeep just kind of had the guys on the assembly line grab whatever was handy. The only way to know for sure is to measure it. There are several ways to do this, but the best thing is to just buy a cheap caliper which can then be used for lots of other purposes as well. Here's a link to one example of what you need...

http://www.harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=92953
 
Back
Top