View Single Post
  #34  
Old January 30th, 2018, 20:40
Ecomike's Avatar
Ecomike Ecomike is offline
NAXJA# 2091
 
Join Date: Dec 2006
Location: MilkyWay Galaxy
Posts: 15,375
Re: Bent valves and wiped cam?

From the prior post data on the PO128 code:

"Coolant temperature does not reach predicted engine coolant temperature within specific time

Tech notes
If cooling system is not leaking and the fluid level is OK, replacing the thermostat usually takes care of the problem."

------------------------

Thinking about the junk, metal shavings from the wiped CAM after those yahoos dorked up the head gasket job, maybe got into the T-state and it stuck open??? And I bet they did not even replace the T-stat, or they used cheap chinese one.

So far the coolant level looks OK.
__________________
Quote=8Mud: "Go ahead and put up the best fence you can build, I'll bet on some Mexican with a few dollars of nails and a pile of scrap lumber."
34 MPG , '85 2WD Cherokee Pioneer with custom installed, 64 hp, 2.2 L Nissan SD22 Diesel 5 spd Manual; & 4 Renix XJs, '87 Wagoneer 4.0, 4WD, 89-Cherokee, 4WD, '87 Cherokee 2WD, & '89 Cherokee Pioneer 2WD, all 4dr. #2091
Reply With Quote