• NAXJA is having its 18th annual March Membership Drive!!!
    Everyone who joins or renews during March will be entered into a drawing!
    More Information - Join/Renew
  • Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.

door hinge?

There's holes in the hinges so with the doors closed you can get a socket extention on your rachet and get some torque on the two inner bolts. I used a 1/4 socket to drive a good T-40 bit. Of course, for the front doors you need to remove the fender to get at it. You need to open the doors once the bolts get out enough, and I ended up using a 1/4 open ended wrench turning the bit to get em out the rest of the way. My ratchet plus socket plus bit was too long to get in there for most of them. A small 1/4 inch ratcheting wrench would have helped but all I had was metric..

I think normal hex head bolts would be easier since you could just stick a ratchet or wrench in there without remove fenders,etc..
 
Back
Top