ilikefish0
NAXJA Forum User
- Location
- New Orleans
I have a 96 4 cylinder with the regulator in the tank. Recently, the regulator decided to stop regulating. I replaced the assembly with a junkyard unit that seems to work, but, given that this is likely to fail, I'm trying to see if replacing just the regulator is possible.
I have disassembled the regulator housing, and the operating bit inside is stamped with a pentastar and the number 4669239 2215, which does not seem to be a valid part number. Most vendors list part number 53005801 or 53030001 as the fuel pressure regulator for my year, but the spec on this seems to be 39 psi rather than the 49 psi listed in the fsm. Any guidance on what an appropriate regulator module for this application would be? Part number 5277829 (90-95 Caravan, among others) looks like it might work and is spec'ed at 50 psi.
The photo is of the regulator and the disassembled housing.
I have disassembled the regulator housing, and the operating bit inside is stamped with a pentastar and the number 4669239 2215, which does not seem to be a valid part number. Most vendors list part number 53005801 or 53030001 as the fuel pressure regulator for my year, but the spec on this seems to be 39 psi rather than the 49 psi listed in the fsm. Any guidance on what an appropriate regulator module for this application would be? Part number 5277829 (90-95 Caravan, among others) looks like it might work and is spec'ed at 50 psi.
The photo is of the regulator and the disassembled housing.